Extracts Up To 12L Per Day: Great extraction capacity for drying buildings following construction work, decorating work, leaks and floods.
Dual Voltage Power: The unit can operate on either 230v or 110v 1ph 50hz power supply.
Hot Gas Defrost: High pressure hot gas from the compressor is diverted into the evaporator coil, where it melts the ice which has formed on the evaporator coil.
Electronic Defrost Timer: Timed to operate automatically every 55 minutes for a period of five minutes to keep the dehumidifier running efficiently & reliably.
Refrigerant Type R134a: The gas used in the hermetically sealed refrigeration circuit is R134a, which is an HFC and has a zero-ozone depletion factor.
Gravity Fed Drain Spout: Either connect a hose to the gravity fed drainage spout or place a container under the spout to collect the water.
Tough Rotomoulded Outer Body: Heavy-duty dehumidifier that can endure the shocks and the knocks that are common in busy, fast-paced working areas.
Galvanised Steel Sub Frame: High quality construction to ensure years of reliable use.
EBAC BD75 Heavy Duty Dehumidifier
Tough & robust 12L portable industrial dehumidifier
The EBAC BD75 is an industrial refrigerant dehumidifier that can remove up to 12-litres of moisture from the air per day. It has an airflow rate of 170m3/hr, while boasting an operating temperature range of 3°C to 35°C and a humidity range of 35 per cent to 90 per cent. Water is drained from the EBAC dehumidifier by either connecting a hose to the unit's drainage spout and leading it to a drain or by placing a container underneath to spout.
The BD75 has a robust roto-moulded outer casing and galvanised steel inner frame that makes it one of the best dehumidifiers for plasterers, decorators and the finishing trade. Ideally suited to the construction industry, renovation and flood drying, this EBAC dehumidifier can also be used for removing moisture from storage rooms, sewage treatment plants, waterworks, factories and warehouses.
The EBAC BD75 portable dehumidifier has moulded handles built-in near the top of the unit and sturdy castor wheels at the base. A built-in defrost function diverts hot gas from the compressor to prevent any ice build-up on the coils if the room temperature falls below 15°C. The BD75 has an electronic defrost timer, which automatically engages for five minutes every 55 minutes. Boasting dual voltage power, this industrial dehumidifier can operate on either 110v or 230v 1ph 50hz power supply.
Dimensions (H x W x D) mm: 620x385x360
Airflow: 170 m3/hr
Effective Volume: 100m3
Typical Extraction (30°C 80%RH): 12L per day
Operating Temp Range: 3°C - 35°C
Refrigerant Type: R134a
On/Off Control Via Humdistat: No
Carrying Handle: Yes
Hot Gas Defrost: Yes
Electronic Defrost Timer: Yes
Voltage Selection Switch: Yes
Free Standing: Yes
Gravity Drain: Yes
Cable Wrap: No
Roto Moulded Body: Yes
Galvanised Steel Subframe: Yes