Master DHP55DV Industrial Dehumidifier With Pump 46 Litres

Save
£150.00

0/5

Removes Up To 46L/Day
5L Tank (Optional)
Built In Discharge Pump
Suitable For Continuous Operation
Refrigerant Gas R290
Digital Humidity Sensor
Built-In Hydrostat
Automatic Shut Off
Digital Control Panel
Dual Voltage (110v/240v)

Status: In-Stock

3 Year Warranty

Extraction Rate of 46 Litres/Day: This professional dehumidifier is an exceptionally easy drying solution to install, operate, and manage in demanding areas of up to 160m³ with a max airflow rate of 400m³/h.

5L Water Tank (Optional): The DHP55DV does not come with a water tank supplied and is available to order as an optional extra

Hose Connection: If you want to run the dehumidifier for longer without having to empty the tank, you can set it to the continuous mode so that it runs regardless of the humidity reading and fix a hose to the hose connection so that the condensation can flow to a drainage outlet.

Built-In Hydrostat: This measures the amount of moisture in the air that is passing through the system.

Automatic Shut Off: A microswitch ensures that the dehumidifier switches off when the water tank reaches its capacity.

Dual Voltage Power Supply: This unit can operate on either 240v (domestic) or 110v (site) power supply.

Quality Components: This dehumidifier has an air filter and a durable outer casing, which is more than capable of dealing with the day-to-day trials of long-term use on site.

Product Video
Master DHP55DV Industrial Dehumidifier With Pump

Quick-drying dual-voltage dehumidifier for a range of applications

The Master DHP55DV Industrial Dehumidifier is ideal for tackling flood and water damage thanks to its built-in discharge pump, which is fitted as standard for continuous drainage and means this dual-voltage dehumidifier can remove up to 46 litres in just 24 hours.

The DHP55DV dehumidifier boasts a corrosive-resistant rotomoulded body, built-in hydrostat, digital humidity sensor, control panel and automatic shut-off. Plus, there is the option to add a 5-litre water tank if you do not have access to a suitable drain.

An easy drying solution to install, operate, and manage in demanding areas of up to 160m³ with a max airflow rate of 400m³/h, the Master DHP55DV dehumidifier work much like air conditioners. Warm moist air is drawn into the dehumidifier by a fan, crossing over refrigerant cooled coils and causing the moisture in the air to condense on the coils before being collected into a tank or drained externally for disposal.

Dehumidifiers are used for a number of applications and help reduce humidity levels, making you less hospitable to allergens, dust mites, mould and mildew and also help speed up the drying process of newly plastered rooms.

Used extensively following flooding or water damage, a dehumidifier will effectively remove excess moisture when placed in an affected room and used within its operating temperature range. Another great use for a dehumidifier is for drying plaster, allowing you to finish decorating the room even sooner. While a dehumidifier on its own can be very effective, it is worth considering using a heater and or an air mover or carpet dryer at the same time to speed the process.
Voltage: Dual Volt (110 & 240)
Max Room Size (Approximate): 160m3
Capacity (30 Degree C/80% RH): 45.9 Litres Per 24 Hours
Air Displacement (m3/h): 400M3 Per Hour
Operating Range (Temperature): 5 - 35 Degrees C
Operating Range (Humidity): 20 - 90%
Power Consumption: 790 Watts
Tank Capacity: 5 Litres (Optional Extra)
Permanent Drain Facility: Yes (With Pump & Hose)
Built In Condensate Pump: Yes
Pump Lifting Height: 3 Metres
Pump Discharge Length: Up To 10 Metres
Refrigerant Gas: R290
Continuous Operation: Yes
Built In Hydrostat: Yes
Automatic Shut Off: Yes
Tank Full Indicator: Yes
Controls: Digital
Length: 600mm
Width: 450mm
Height: 880mm
Noise Level: 56 db(A)
IP Rating: TBC
Weight: 47Kg