Removes Up To 10L Per Day: Great capacity for managing humidity problems in rooms around the home, garages and basements, as well as following plastering & decorating work.
Adjustable Humidistat: Set the desired humidity level and the dehumidifier will automatically switch itself on and off.
4L Water Collection Bucket: Collects moisture & features a switch that shuts the dehumidifier down when the bucket is full to prevent overflowing.
Gravity Fed Drainage Possible: A hose can also be fitted to this dehumidifier and condensate can be gravity fed to a drain allowing more continuous operation.
Hot Gas Defrost: Hot gas from the compressor is automatically diverted into the evaporator coil, where it melts any ice that has formed.
150m3 Airflow: Allows the dehumidifier to perform effectively in areas up to 100m3.
Rotomoulded Polyethylene Casing: Combined with the internal steel frame, this feature protects internal components to withstand knocks and bumps.
Portable Design: Fitted with handles moulded into either side of the main body, as well as rugged castors.
Quiet Operation: With a low volume level of around 51db, this dehumidifier is the same normal conversion.
Washable Air Filter: Removes airborne dust particles to improve the quality of the circulated air.
Standard Voltage: This industrial-grade dehumidifier plugs into a standard 230-volt outlet.
Condensate Pump Version Available: A version of the EBAC RM40 dehumidifier is available with a condensate pump & 7.8m drain hose. View the Ebac RM40P dehumidifier with condensate pump.
EBAC RM40 Portable Dehumidifier
Heavy-duty 10L portable dehumidifier for domestic & professional use
The EBAC RM40 heavy duty dehumidifier can remove up to 10 litres of moisture every day, which is collected in a four litre bucket. It has an airflow rate of 150m3/hr, operating temperature range of 3°C to 35°C and a humidity range of 35 per cent to 90 per cent. The RM40 is ideal for professional and domestic use in dealing with the likes of burst pipes, leaking roofs, flooded washing machines, river floods and severe condensation.
The EBAC dehumidifier features a full tank and pump fault indicator, which stops the dehumidifier when the buckets reaches maximum capacity or if there is a fault. A hose can also be placed over the spout inside the unit, so condensate can be gravity fed down a drain for continuous operation.
An adjustable humidistat on the EM40 dehumidifier allows you to set a desired humidity level and the dehumidifier will automatically switch itself on and off. The RM40 is equipped with a hot gas defrost system, which ensures a quick and efficient clearing of ice from the coil, allowing a minimum operating temperature of 3°C.
The EBAC RM40 is an industrial-grade dehumidifier that plugs into a standard 230-volt outlet. It also has a washable dust filter, which catches dust in the air to prevent it from being circulated by the dehumidifier.
The EBAC dehumidifier has a galvanized steel subframe, rotomolded cover and base to protect its internal components. Robust castor wheels and a sturdy handle make it easy to move. Just position the unit where it is needed, plug in, switch on and leave it to get on with the job.
A version of this dehumidifier is also available with a condensate pump - the EBAC RM40P dehumidifier. The RM40P model features a condensate pump and 7.8m drain hose, which automatically pumps condensate water away from the unit.
Dimensions (H x W x D) mm: 620x385x360
Airflow: 150 m3/hr
Effective Volume: 100m3
Typical Extraction (30°C 80%RH): 10L per day
Operating Temp Range: 3°C - 35°C
Refrigerant Type: R134a
On/Off Control Via Humdistat: Yes
Carrying Handle: Yes
On/Off Control Via Humidistat: Yes
Hot Gas Defrost: Yes
Electronic Defrost Timer: Yes
Free Standing: Yes
Integral Bucket: Yes
Gravity Drain: Possible
Rotational Moulded Body: Yes
Galvanised Steel Subframe: Yes