-
Extracts Up To 12L Per Day: Great capacity to dry rooms out following construction and decorating, leaks and floods, or general humidity control in challenging spaces.
170m3/hr Airflow: Excellent airflow, suitable for areas up to 100m3.
All Steel Construction: Heavy-duty dehumidifier can endure the shocks and the knocks common in busy, fast-paced working areas.
Made In The UK: Designed and built by experts in the industry.
Portable Design: A robust handle and castors make moving the dehumidifier easy.
Single Voltage & Dual Voltage Options: Available in either 230V or 110/230V dual voltage.
Hot Gas Defrost: High pressure hot gas from the compressor is diverted into the evaporator coil, where it melts the ice that has formed.
Electronic Defrost Timer: This defrost control device is timed to operate every 55 minutes for a period of five minutes to keep the dehumidifier operating efficiently.
R134a Refrigerant Type: The gas used in the hermetically sealed refrigeration circuit is R134a, which is an HFC and has a zero-ozone depletion factor.
Gravity Fed Condensate Drainage: Water runs out of the unit via a gravity fed drain. A hose can be connected to the drainage spout for continous operation, or you can place a container under the spout to collect the water.
-
EBAC BD70 Industrial Building Dryer
Portable professional dehumidifier for heavy duty applications
The EBAC BD70 industrial building dryer can remove up to 12-litres per day using gravity drainage, which automatically removes water via a drainage hose. The BD70 has an airflow rate of 170m3/hr, while boasting an operating temperature range of 3°C to 35°C and a humidity range of 35 per cent to 90 per cent. The EBAC BD70 dehumidifier is suited to the construction industry, renovation and flood drying, but can also be used for storage rooms, sewage treatment plants, waterworks, factories and warehouses.
The EBAC BD70 Industrial Refrigerant Dehumidifier is lightweight and has a sturdy handle attached at the top combined with robust castor wheels located on the base. Each machine is built in the UK with all-steel construction. This energy efficient dehumidifier has a built-in hot gas defrost function, which melts any ice that may have formed if the temperature of the space falls below 15°C.
Fitted with a gravity drain system, this EBAC industrial dehumidifier uses a drain hose to automatically remove the water collected during the dehumidification process. It is available in both single voltage (230v) and dual voltage (230v/110v). The EBAC building dryer uses hermetically sealed refrigeration gas R134a, which has a zero-ozone depletion factor.
-
Dimensions (H x W x D) mm: 508x305x305
Weight: 27kg
Voltage: 230v / 230-110v
Phase: 1
Frequency: 50Hz
Power: 0.46kW
Current: 2A (SV), 4/2A (DV)
Airflow: 170 m3/hr
Effective Volume: 100m3
Typical Extraction (30°C 80%RH): 12L per day
Operating Temp Range: 3°C - 35°C
Refrigerant Type: R134a
On/Off Control Via Humdistat: No
Carrying Handle: Yes
Hot Gas Defrost: Yes
Electronic Defrost Timer: Yes
Voltage Selection Switch: Dual Voltage Model Only
Castors: Yes
Free Standing: Yes
Gravity Drain: Yes
Cable Wrap: No
Stoved Epoxy Finish: Yes
All Steel Construction: Yes
Related Products
-
-
Save £20.00Your product has been added to the cart
×
EBAC BD70 Industrial Building Dryer
- Removes Up To 12L Per Day
- 230v or Dual Voltage Power
- Operating Temp Of 3°C to 35°C
- Nominal Effective Volume 100m3
- Hot Gas Defrost
- Gravity Drainage
- Heavy Duty Construction
