DRYING EQUIPMENT SPECIALISTS
2 Year Warranty
Call FREE: Mobiles & Landlines
The Ecor Pro EPD170LGR is a sturdy dehumidifier that uses low grain refrigerant technology. Designed for heavy-duty applications such as construction drying and restoration, the Ecor Pro low grain industrial dehumidifier is highly effective at removing water from a space even when the relative humidity is extremely low. This is why it is widely used in trade and flood recovery. The EPD170LGR can extract up to 80 litres of water at a maximum capacity between 4°C and 38°C. It is highly versatile and perfect for flood damage restoration, renovation, construction and other similar tasks. The dehumidifier has a single fan speed with a maximum airflow of 420m³ per hour, which ensures consistent and reliable performance at all times.
The EPD170LGR dehumidifier has four rubber feet to keep it stable and is designed to work efficiently as a freestanding unit. Its low profile makes it easy to stack for both storage and transport purposes. Besides, there are grip handles on both sides of the unit and two wheels built into the design to make it easy to carry or pull along. The Ecor Pro dehumidifier's outer casing is made of tough and durable rotomolded plastic. It doesn't rust, and the panels can be removed effortlessly to access the drain tray, pump and other components for servicing and maintenance. The outer casing is impact-resistant, protecting the internal components from damage caused by knocks and bumps. The carbon filter is replaceable and is protected by a robust aluminium frame that can be easily wiped clean.
The Ecor Pro EPD170LGR dehumidifier can be used continuously. The dehumidifier comes with a 12-metre push-fit drainage hose and an integrated water pump that lifts up to 3.5 metres. The unit has a push-fit spigot that is protected and allows for easy attachment of the drainage hose to remove excess water. It can be used to extract moisture from spaces below ground level, such as basements and trenches, as well as from spaces at ground level. The side air outlet can be ducted to allow for focused spot drying, and it can be used in tented areas to speed up the drying process.
The Ecor Pro EPD170LGR is easy to use. It has an intuitive electronic control panel on the front with a clear display that shows all available modes and information. You can adjust and control the humidistat, water purge and different functions on the panel. Besides, you can view different parameters such as input and output humidity and temperature readings, run time hours, power consumption and coil temperature. This Ecor Pro dehumidifier is designed to be energy efficient, with its compressor operating times optimised based on internal microprocessor calculations to ensure the best performance.
Dimensions: 415 × 520 × 620cm
Technology: Low Grain Refrigerant/Compressor
80 L/day (35 0C RH95%)
55 L/day (30 0C RH80%)
35 L/day (27 0C RH60%)
Cord Length: 5m
Colour/Material: Dark Grey & Yellow/Rotational Moulded Polyethylene & Polypropylene Mix
Duct Size: Adaptor provided for 125mm duct
Swimming Pool Ready: No
Humidistat Inside/Option: Yes/Yes
Carry Handle: 2 grip points each side
Water Tank: No
Fan Speeds/Sound: 1/55dB
Operating Temp: 4°C/39°F — 38°C/100°F
Power Out Restart/Works From DC-AC Convertor: Yes/No
Airflow M3/HR — CFM: 420 – 247
Approval: CE, ETL, CETL, GS, RoHS