Thermobile IMA 111 Indirect Oil Fired Space Heaters 110kW

Save
25%

0/5

110kW Heating Capacity
Large Volumes Of Clean Warm Air
Axial Or Radial Fans Available
Ducting Connection
Tigerloop Included As Standard
Tough, Industrial & Portable Design
230v & 400v Models Available
Designed For Use With External Fuel Tank
Ideal For Construction, Warehouses, Factories & More

Status: In-Stock

2 Year Warranty

110kW Heat Capacity: Large heat capacity to heat areas on construction sites, as well as warehouses, agricultural buildings, large marquees, events & more.

Clean Warm Air: The Thermobile IMA 111 is an indirect space heater, so it produces only clean, dry, fume-free warm air. This makes it ideal for heating enclosed, poorly-ventilated spaces safely.

Three Models Available: The IMA 111 AX features a 230v axial fan which offers up to 130 Pa pressure build-up, ideal for use with single lengths of ducting with few curves. The IMA 111 RAD features a 230v radial fan which offers up to 300 Pa, which allows multiple lengths of ducting to be used, to send warm air to separate locations, further away from the heater. The IMA 111 RHP features a 400v 3 phase high pressure radial fan, which offers extra high pressure of 500 Pa - ideal for the most demanding sites to send warm air over long distances.

500mm Air Outlet Cone: Allows sections of ducting can be attached to this heater, in order to direct the clean warm air into the space that you need to heat.

200mm Flue Connection: Combustion by-products are exhausted out of the top of the heater. Sections of flue pipe are available separately, allowing you to safely exhaust fumes away from the space.

Portable Design: Forklift pockets, large wheels and a handle make the heater very portable. It is easy to transport, position and re-position when required on site. Its slim profile allows it to fit through 80cm wide doorways.

Thermostat Connection: An optional heavy duty thermostat can be connected to this heater, allowing you to set a required temperature within the space. The thermostat will switch the heater on and off as required in order to maintain the set temperature. This saves fuel and adds extra convenience.

Tigerloop Included: This heater features no internal fuel tank. It is designed to be connected to an external fuel tank of your choice. The included tigerloop removes any air from the fuel as it enters the heater.

Fan Only Switch: Allows the fan to operate without heat in order to ventilate areas when required.
Thermobile IMA 111 Indirect Fired Space Heaters

Large portable industrial space heaters with a number of fan options

The Thermobile IMA 111 is a large industrial space heater, designed for heating areas on construction sites, as well as warehouses, factories, agricultural buildings, large marquees & events and more. It can be used to heat spaces, to dry spaces out and to dry out produce and materials. As it is an indirect fired heater, it throws out only clean-fume free warm air, while fumes are exhausted out of the top of the heater via a flue. Lengths of ducting can be fixed to this heater in order to vent the clean warm air over long distances and into specific spaces, making it safe to heat confined spaces on site with little ventilation.

Three models of the Thermobile IMA 111 indirect fired space heater are available. The IMA 111 AX features a 230v axial fan which offers up to 130 Pa pressure build-up, which allows it to be used with single lengths of ducting with few curves. The IMA 111 RAD features a 230v radial fan which offers up to 300 Pa, which allows multiple lengths of ducting to be used, to send warm air to separate locations, further away from the heater. The IMA 111 RHP features a 400v 3 phase high pressure radial fan, which offers extra high pressure of 500 Pa - ideal for the most demanding sites to send warm air over long distances.

The Thermobile IMA 111 indirect diesel space heater is designed for industrial use. It offers large volumes of clean warm air, an air outlet temperature circa 40-60°C, and it has a high efficiency heat exchanger offering 92% efficiency. The combustion chamber is heat resistant up to 850°C and it features a tigerloop as standard - a fuel filter with condensate separator - as well as an intercal industrial burner with flow control. This heater also has a thermostat connection point, which offers the capability to automatically switch the heater on and off as required in order to maintain a set temperature, saving on fuel and running costs, and adding convenience. The fan on this space heater stops at temperatures below 40 °C, to prevent it from circulating cold air when starting up. Constant ventilation is also possible with an extra switch position - ideal for keeping sites ventilated during warmer months or in challenging conditions.

Despite its industrial heating capabilities, the Thermobile IMA 111 indirect heater is also a convenient size. Its portable design, with forklift slots, large wheels and a handle, make it easy to move around a site and put into position, while the slim profile allows it to fit through door widths of 80cm.

Please note: This heater features no internal fuel tank. An external fuel tank is required.
Thermobile IMA 111 AX Heater Specifications
Part number: 41.724.800
Heat Capacity: 110kW
Fuel consumption oil (l/hr): 10.9
Fan: Axial
Heated air flow (m3/hr): 5800
Maximal ventilator backpressure: 130
Power consumption (Amps): 4.4 / 230V
Outlet cone Ø (mm): 500
Flue connection Ø (mm): 200
Thermostat connection: YES

Thermobile IMA 111 RAD Heater Specifications
Part number: 41.724.710
Heat Capacity: 110kW
Fuel consumption oil (l/hr): 10.9
Fan: Radial
Heated air flow (m3/hr): 8000
Maximal ventilator backpressure: 300
Power consumption (Amps): 15 / 230V
Outlet cone Ø (mm): 500
Flue connection Ø (mm): 200
Thermostat connection: YES

Thermobile IMA 111 RHP Heater Specifications
Part number: 41.724.210
Heat Capacity: 110kW
Fuel consumption oil (l/hr): 10.9
Fan: High Pressure Radial
Heated air flow (m3/hr): 10,000
Maximal ventilator backpressure: 500
Power consumption (Amps): 7.5 / 400V
Outlet cone Ø (mm): 500
Flue connection Ø (mm): 200
Thermostat connection: YES