Manual residue pump for removing surface water down to 2mm
The Elite SPK450 Manual Residue Pump can be fully submerged to a depth of up to 5m to pump water away from an area. It has a 1" diameter outlet with a maximum flow rate of 85-litres per minute, and it can pump water vertically up to a maximum height of 10m. The SPK450 submersible pump can quickly move large quantities of water. It is ideal for draining basements, buildings, trenches, and other domestic, commercial, and industrial spaces following a flood or leak.
This efficient water pump can remove water down to just 2mm surface residue. It is ideal for remediation and restoration. The Elite SPK450 can also pump away small solids of up to 2mm that are in the water. It has an adjustable outlet that can be set to pump water out from the top or the side of the pump for application convenience. The pump comes with a 10m power cord and lifting rope included, and a 10m length of 1" diameter layflat hose is available as an optional accessory.
Voltage: 110v Suction Type: Submersible Outlet Diameter: 25mm (1 Inch) Outlet Direction: Top or Side Max Flow Rate: 85L per min Material Intake: Clean & Dirty Water Motor: 450W Cut Off Switch: Manual Plug: 16 Amp Max Lifting Height: 10m Power Cable Length: 10m Motor Thermal Protection: Included Lift & Lowering Rope: Included Handle: Included Weight: 11kg
Pump Housing: AlSi12 Pump Shaft: Stainless iron Mechanical Seal: Alumina/Graphite (Dual Seal) Pump Base: NBR with stainless inserted Impeller: NBR with stainless inserted Type of liquid: Water with no suspended abrasive material, PH value:6.5-8.5 Max liquid temperature: 40℃ Max Submersion Depth: 5m Max. Diameter of solids: 2.0mm Protection Class: IP68 Insulation Class: B