Dantherm CDT 40S Professional Dehumidifier 43.5 Litres

Dantherm CDT 40S 43L Mobile Dehumidifier

For professional drying applications

The Dantherm CDT 40S is an efficient, cost-effective dehumidifier that can remove up to 43.5 litres of water within 24 hours. It is suitable for use in industrial, commercial and domestic properties following a leak, flood or construction and renovation work.

The Dantherm CDT dehumidifier has an airflow of 560 m³/h and an operating temperature range of 3 - 35℃ for effective drying in a range of conditions. It features two air ducts to connect flexible ducting (max length 5m) and has a 1kW heating element, a high-pressure fan to draw in large volumes of humid air. Plus, an internal 14 litre water collection tank.

The CDT 40S MKIII is made from a long-lasting, powder coated hot galvanized steel with plastic bumpers at the base. Both the evaporator and the condenser are coated with an epoxy resin for extra protection. These mobile dehumidifiers are stackable and boast adjustable handles, large wheels and overall lightweight construction. The Dantherm CDT 40S electric dehumidifiers also use eco-friendly R454c refrigerant, which meets all 2020 EU regulations.

The Dantherm 40S has an easy-to-read electronic control panel that displays accurate room humidity, temperature, energy consumption, service status and fault finding. It automatically stops operating if the water tank becomes full and the defrosting function flushes the evaporator with hot gas if it drops below 5℃.

The Dantherm CDT 40S can be connected to a ½” hose for continuous gravity fed drainage. Available as an extra is the condensate pump cassette, which removes the need to manually empty the water tank and has a vertical lift of 3 metres. You can also add a remote hygrostat, which allows you to set a desired humidity level and switches the dehumidifier on and off.