DRYING EQUIPMENT SPECIALISTS
Out of Stock
1 Year Warranty
Call FREE: Mobiles & Landlines
The Dantherm CDT 30S refrigerant dehumidifier can remove up to 34.4 litres of water from the air in 24 hours. Designed for professional use in the building or flood damage restoration sectors, it has an operating range of 3°C - 35°C and an airflow rate of 350m³/h. It also features a 1kW heating element, which warms up the dry processed air to improve drying efficiency, while a high pressure fan and two x Ø100 mm air ducts allow flexible ducting (max length 5m) to be connected to the dehumidifier, to aid with drying under flood boards and in crawl spaces.
The Dantherm CDT 30S has an outer casing made from powder coated hot galvanized steel, while both the evaporator and condenser are epoxy coated for protection. Large bumpers around the edge offer protection from knocks and bumps. An automatic defrosting function flushes the evaporator with hot gas if it reaches 5℃ and ice begins to form on the surface. It has large rubber wheels and an adjustable handle, making it portable. The dehumidifier can be wheeled around a site without issues, so you can place it where it is required. It is also stackable for convenient storage and transport when not in use.
Featuring a digital control pad that displays usage hours, energy consumption, temperature, relative humidity, service information, faults and when the tank is full, this Dantherm dehumidifier offers a professional solution to drying out rooms following floods, leaks, burst pipes, construction and restoration work. It uses eco-friendly R454c refrigerant, which is non-toxic and meets all of the 2020 EU regulations for safe use in climate control equipment.
The Dantherm CDT30S mobile dehumidifier comes with a 7 litre water collection tank, but can be connected to a half-inch hose for continus gravity fed condensate drainage. You can upgrade the unit with condensate pump cassette, which pumps the water away up to 10m and even has a vertical lift capability of three metres, ideal for use in basements and cellars. Other additional extras include a remote hygrostat, which allows you to set the desired humidity level and switches the dehumidifier on and off as required automatically.
Dantherm CDT 30S Dehumidifier Specs
Operating range – humidity: 40-100% RH
Operating range – temperature: 3-35°C
Dehumidification capacity at 30°C/80% RH: 34.4 L/24h
Air volume: 350 m³/h
Power supply: 230 V/50 Hz
Max. power consumption: 1.8 kW
Sound level (at 1 metre): 56 dB(A)
Water container capacity: 7 litres
Height (Handle up): 736mm