DRYING EQUIPMENT SPECIALISTS
Out of Stock
1 Year Warranty
Call FREE: Mobiles & Landlines
The Dantherm CDT 40 is a high-performance dehumidifier capable of removing up to 43.5 litres of water in 24 hours. It has an operating temperature range of 3℃ - 32℃ and an airflow rate of 350m³/h, which makes this mobile dehumidifier suitable for industrial, commercial and domestic use in areas dealing with construction and decorating work, leaks and floods.
The Dantherm CDT 40 has a touch screen that displays humidity levels, temperature, energy counter, service status, fault finder and a full water tank alert. The dehumidifier's metal outer casing that allows it to be stacked when in transport or storage. It has large durable wheels and an adjustable handle, which offer excellent mobility. Plus, plastic bumpers to avoid accidental damage. Both the evaporator and condenser are epoxy coated to ensure longevity. The CDT 40 uses eco-friendly R454c refrigerant, which is non-toxic and meets all the 2020 EU regulations for safe use in climate control equipment.
The Dantherm CDT 40 has a 14-litre water collection tank as standard, but a half-inch hose can also be connected for gravity fed drainage and continuous operation. You can upgrade to a condensate pump cassette, which allows the pump to a drain up to 10m from the unit and has a vertical lift capability of three metres. Using the condensate pump cassette allows you to run the dehumidifier continuously. You can also add a remote hygrostat, which allows you to set a desired humidity level and will switch the dehumidifier on and off.
Operating range – humidity: 40-100% RH
Operating range – temperature: 3-35°C
Dehumidification capacity at 30°C/80% RH: 43.5 L/24h
Air volume: 350 m³/h
Power supply: 230 V/50 Hz
Max. power consumption: 0.9 kW
Sound level (at 1 metre): 57 dB(A)
Water container capacity: 14 litres
Height (Handle up): 823mm