Free shipping on all of our Arcotherm Product for a limited time only! Click here to buy
Workshop Dehumidifiers
A workshop dehumidifier is used to manage relative humidity (RH) in a workshop environment. RH creates moisture on metal surfaces, which when combined with oxygen leads to rust.
Ebac Industrial Products
Ebac CD85 Commercial Dehumidifier
- Removes Up To 35L Per Day
- Operating Temp Range 3°C to 35°C
- Effective Volume 237m3
- Built-in Humidistat
- Temperature Sensitive Defrost
- Integral Condensate Pump
- Adjustable Air Inlet & Outlets
- 230v Power Supply
Master Climate Solutions
Master DH 752 Dehumidifier
- Extracts Up To 47.2 Litres Per Day
- Compact & Portable Design
- 5.7L Water Tank & Hose Connection
- Digital Control Panel
- Inbuilt Humidistat & Hour Counter
- Washable Air Filter
- Hot Gas Defrost
- 230v Power Supply
- Ideal For Tradespeople & Industrial Spaces
Sealey
Sealey SDH70 Industrial Dehumidifier
- Removes Up To 70L/Day
- Max Airflow 400m³/hr
- Ideal For Spaces 80-160m³
- Hose Connection For Continuous Drainage
- Auto Defrost Function
- Integrated Humidistat
- Washable Activated Carbon Air Filter
- Straightforward Digital Control Panel
- Robust Castors & Handle
Ecor Pro
Ecor Pro DH1211 DryFan 110v Desiccant Dehumidifier
- Extracts Up To 12L Per Day
- Portable Or Can Be Installed
- Designed To Be Used With Ducting
- Moisture Expelled As Vapour
- Operates In Extremely Cold Conditions
- Ideal For Home & Commercial Use
- FREE Shipping
Woods
Woods WCD8HGH Pro Dehumidifier
- Extracts Up To 49 Litres Per Day
- 300m³/h Max Airflow Rate
- Suitable For Spaces Up To 450m²
- 230v Power Supply
- 9L Tank & Hose Connection
- Intelligent Hot Gas Defrost Function
- Efficient Operation
- Hour Counter
Ecor Pro
Ecor Pro DH811 INOX 110v Desiccant Dehumidifier
- Removes Up To 8 Litres Per Day
- Made From Marine Grade Stainless Steel
- Moisture Vented Away As Vapour
- Portable or Installed Unit
- Designed To Be Used With Ducting
- Integrated Humidistat Dial
- -20°C to +40°C Operating Temp Range
- 110v Power Supply
- FREE Shipping
Ecor Pro
Ecor Pro DH811 DryFan 110v Desiccant Dehumidifier
- Extracts Up To 8 Litres Per Day
- Epoxy Coated Steel Casing
- Moisture Vented Away As Vapour
- Portable or Installed
- Designed To Be Used With Ducting
- -20°C to +40°C Operating Temp Range
- 110v Power Supply
- Ideal for Workshops, Attics, Basements & Garages
- FREE Shipping
Master Climate Solutions
Master DH 92 Dehumidifier
- Extracts Up To 80 Litres Per Day
- 1000m3/h Max Air Flow
- 12L Water Tank & Hose Connection
- Built-In Humidistat
- Hot Gas Defrost
- 230v Power Supply
- Ideal For Construction & Industrial Use
Calorex UK
Calorex DH 150 Industrial Dehumidifier
- Removes Up To 150L Per Day
- 230v Or 3 Phase Available
- Integrated Humidistat
- Polyester Coated Evaporator & Condenser
- Plastisol Coated Galvanised Steel Cabinet
- Self Contained & Fully Automatic
- Automatic Constant Fan Flow
- Low Temp Operation & Hot Gas Defrost
Woods
Woods WCD4 Pro Dehumidifier
- Extracts Up To 41 Litres Per Day
- 296m³/h Max Airflow
- Suitable For Spaces Up To 230m²
- 230v Power Supply
- 11.4L Tank & Hose Connection
- Intelligent Defrost Function
- Efficient Operation
- Integrated Humidistat & Hour Counter
Reduce Moisture With A Workshop Dehumidifier
Why Humidity Matters
The danger of moisture is that the effects are often hidden until the damage is permanent. Failing to manage an RH level below 50-55% can lead to:
Oxidation & Corrosion: In a high humidity environment, rust can happen within hours. Moisture seeps into hand tools and machinery causing them to seize up.
Material Instability: Wood and timber absorb moisture. This can lead to warping and swelling in a workshop environment.
Microbial Growth: High humidity is a breeding ground for mould and can permanently damage upholstery and stock.
Atmospheric Variables: Hidden humidity can disrupt the drying time for adhesives and paints.
Moisture Control for Workspaces
Workshops located in garages or outbuildings suffer from poor insulation. Even if the air feels dry, these spaces cause condensation to form on cold surfaces.
Lower temperatures and large amounts of dust often cause domestic units to fail, our industrial grade units utilise these two technologies:
Refrigerant (Compressor): These units use cold coils to condense water, they are best used in heated workshops.
Desiccant (Absorption): These units use a silica gel rotor to absorb moisture, desiccants are best used for unheated workshops.
The Right Tool for Your Project
Our range covers dehumidification systems across many environments:
Joinery & Woodworking: Wood is like a sponge and if the air changes so will the wood.
Metalwork & CNC Rooms: Prevent rust on steel and protect electronic equipment
Classic Car Garages: Keep the rust and mould away with the proper protection.
For workshops with lots of dust, protect the internal components by replacing filters every 12 months.
Technical Specification & Selection
There is more than just matching the floor size to choosing the right unit. To provide an authoritative specification, we consider how often moisture is introduced, the temperature of the space, material load, and how drainage will be managed.
Flexible Installation Options
Our range covers Portable Dehumidifiers for changing layouts and Wall Mounted Dehumidifiers for fixed positions.
Trust the Drying Experts
With decades of experience, we help customers select the right tools for their working environment. Every unit is selected for its energy efficiency and durability in harsh environments.
Use our Drying Calculator to estimate an extraction rate for your dehumidifier and be sure to download technical data sheets from our product pages.
Contact our technical team via phone call or through live chat if you need any further advice.