Extracts Up To 110 Litres Per Day: The Ecor Pro DSR12 offers efficient & effective drying performance, with cooling and compressor operating times based on an internal microprocessor calculation to optimise performance.
Condensate Drainage Outlet: The condensate is gravity fed out of the dehumidifier via a standard 15mm (3/4″) brass female drain fitting. Can be used in conjunction with a condensate pump if needed.
Can Be Used With Ducting: A ducting adaptor can be used in order to attach ducting to the unit. This allows air to be vented air in and out of the DSR12 dehumidifier, so it does not need to be installed directly in the area that you want to dehumidify.
Optional Humidistat Control: An optional remote humidistat is available. It allows you to set a required humidity level in the space. The humidistat will switch the dehumidifier on and off automatically to maintain the desired humidity level.
Reticulated Foam Filter: Improves quality of the circulated air. The dust filter can be shaken clean periodically to prevent dirt from entering the dehumidifier. Very easy to access with two clip springs keeping the metal filter frame in place that are easily opened.
Swimming Pool Ready: The Ecor Pro DSR12 has internally protected components that allow it to be used to dehumidify swimming pool rooms, spas and more, as chemicals in the water won't damage the dehumidifier.
Variable Installation: The DSR12 has 4 rubber feet that allow the unit to be free standing. It can also be mounted or installed into ceilings or wall cavities high up to maximise extraction as moisture migrates upwards.
Auto Reset: If there is an interruption to the power supply, the dehumidifier will resume automatically. The unit has a staggered startup so that if several DSR units are used in the same building, the surge current should not trip power breakers.
Tough Construction: The Ecor Pro DSR12 has an all steel construction for strength and durability. Suitable for commercial and industrial use in offices, pools, museums, libraries, warehouses & more.
Easy Service & Repair: This commercial dehumidifier allows easy to access the internal parts for any service or repair needed. It is also equipped with internal re-gassing points.
Ecor Pro DSR12 Dehumidifier
Ductable commercial dehumidifier
The Ecor Pro DSR12 commercial dehumidifier can extract up to 110-litres of excess moisture from a range of large spaces. With a maximum airflow rate of 1500m³/h and broad operating temperature range of 5℃ - 35℃, this efficient compressor dehumidifier is ideal for offices, museums, libraries, storage facilities, and warehouses, indoor swimming pools, gyms, and spas.
This dehumidifier is easy to use and practical. Just install it where it needs to be, plug it in and switch it on, and it runs as a self-contained, automatic system. You can use an optional remote humidistat to control the relative humidity within 50% - 80%. The Ecor Pro DSR12 also has a reticulated foam air filter, which captures dust and dirt.
The Ecor Pro DSR12 swimming pool ready dehumidifier has a steel construction, epoxy paint coating and specialist coils to provide it with the durability and resilience to cope with challenging conditions and harsh chlorinated water. The unit can be installed directly in the swimming pool room, or in a separate room where the swimming pool filtration system is set up. Ducting the dehumidifier allows you to install it into a crawl space, cupboard or cavity and vent moist air to and from a specific room. The DRS12 does not have a water tank, so you do not need to empty it, and all condensation is gravity drained through a standard 15mm brass fitting.
Weight: 66 kg
Dimensions: 665mm × 660mm × 453mm
Max extract: 110L
Power / Plug: 1490W, 220v, 50Hz / 6.8A
Cord length: 2m
Colour / Material: White / Mild Steel Epoxy Paint
Swimming pool ready: Yes
Humidistat inside / Humidistat option: No / Yes
Carrying handle / Water container: Yes / No
Fan speeds / Sound: 2 / 53-55dB
Operating temp: 5℃ to 35℃
Power out restart / Works from DC-AC convertor: Yes / No
Airflow M3/HR: 900-1500